4” x 3” Chemical Pump
CHEMFLO® 10
The CHEMFLO® 10 end suction centrifugal pump was engineered to be highly efficient. Featuring a total head up to 260 feet and a flow reaching up to 650 GPM, this chemical pump can run all of your hazardous materials without corroding. Multiple seal options are available on top of the standard 2100 carbon / ceramic / Viton mechanical seal.
Share
The ChemFlo® 10 pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Multiple impeller trims allow the ChemFlo® 10 to meet most duty points up to 650 GPM and total head up to 260 feet. Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / Viton mechanical seal.
ChemFlo® 10 pumps are offered in two configurations, pump (with motor) and PumPAK® (without motor) versions. Motors available are 40HP 324JM frame, and 50HP 326JM frame. If ordering a PumPAK®, please note that the electric motor must have a base.
SUCTION AND DISCHARGE | 4” 300# ANSI x 3” 150# ANSI Flanges |
APPLICATION | Agricultural, Commercial, Industrial, Marine, OEM |
MATERIALS OF CONSTRUCTION | 316 Stainless Steel |
FLOW | Up to 650 GPM |
HEAD FEET | Up to 260’ |
IMPELLER | 8” Enclosed, Cast CF8m 316 Stainless Steel |
MOTOR | Up to 50HP |
DRIVE OPTIONS | Close Coupled 324JM / 326JM, PumPAK® |
SEAL | Type 21, Carbon, Ceramic, Viton Standard |
DRIVE SLEEVE | Impeller Threaded to Motor |
OPTIONS | Plan 11 Seal Flush |
Related Products
Descriptions & Specifications
The ChemFlo® 10 pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Multiple impeller trims allow the ChemFlo® 10 to meet most duty points up to 650 GPM and total head up to 260 feet. Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / Viton mechanical seal.
ChemFlo® 10 pumps are offered in two configurations, pump (with motor) and PumPAK® (without motor) versions. Motors available are 40HP 324JM frame, and 50HP 326JM frame. If ordering a PumPAK®, please note that the electric motor must have a base.
SUCTION AND DISCHARGE | 4” 300# ANSI x 3” 150# ANSI Flanges |
APPLICATION | Agricultural, Commercial, Industrial, Marine, OEM |
MATERIALS OF CONSTRUCTION | 316 Stainless Steel |
FLOW | Up to 650 GPM |
HEAD FEET | Up to 260’ |
IMPELLER | 8” Enclosed, Cast CF8m 316 Stainless Steel |
MOTOR | Up to 50HP |
DRIVE OPTIONS | Close Coupled 324JM / 326JM, PumPAK® |
SEAL | Type 21, Carbon, Ceramic, Viton Standard |
DRIVE SLEEVE | Impeller Threaded to Motor |
OPTIONS | Plan 11 Seal Flush |